This is the first bondage belt that we ever made. It is about 30 inches long, 2½ inches wide, has eight 1 inch "D" rings, is lined with black plush felt, and, uses velcro to keep the belt from twisting near the buckle.

Many bondage belts similar to this one attach the "D" rings with individual straps (about 3 inches long). That design resolves a problem we had in making this belt. When worn, the pad and the strap have a different radius. That means that when laid flat, the holes for the rivets don't line up in exactly the same position. So, one "D" ring was attached, then, the position for the rivet holes for the next "D" were determined and punched, and, so on.

The main reason why we decided to make this bondage belt with a single narrow strap was to handle the situation of rivets popping and a "D" ring moving. Rivets are strongest when the pull/pressure on then is from side to side. Rivets are weakest when the pull/pressure is directly away from the leather as in this bondage belt. In other bondage belts with an individual short strap for each "D" ring, popped rivets will send the "D" ring flying. But, with this bondage belt, if the pull on a "D" ring causes its rivets to pop, the rest of the rivets in the 1 inch wide strap will hold onto the "D" ring.